---
description: The daily maintenance of fiber laser marking machine not only affects the working efficiency of the system, but also affects the service life of laser engraver.
title: Daily Maintenance for Fiber Laser Marking Machine
image: https://www.stylecnc.com/uploads/allimg/160304/1457097474189468.jpg
---

# [Fiber Laser Marking Machine Daily Maintenance](https://www.stylecnc.com/user-manual/Daily-maintenance-of-fiber-laser-marking-machine.html)

Last Updated: 2023-10-07 By [Jimmy](https://www.stylecnc.com/author/jimmy)3 Min Read

## Daily Maintenance for Fiber Laser Marking Machine

The daily maintenance of fiber laser marking machine not only affects the working efficiency of the system, but also affects the service life of laser engraver.

**Fiber Laser Marking Machine Daily Maintenance:**

![Fiber laser marking machine daily maintenance](<> "Fiber laser marking machine daily maintenance")

1\. When the fiber laser marking machine is not working, cut off the power of the laser marking machine and the computer, close the field lens cap to prevent dust from contaminating the optical lens.

2\. The circuit of the machine is in a high voltage state when it is working. For non-professionals, do not perform maintenance when the machine is turned on to avoid electric shock.

3\. Turn off the power immediately if any fault occurs in this machine.

4\. If the device is used for a long time, the dust in the air will be absorbed on the lower surface of the focusing lens. The lighter will reduce the power of the laser and affect the marking effect; the heavy one will cause the optical lens to overheat and cause it to burst. When the marking effect is not good, carefully check the surface of the focusing lens for contamination.

5\. If the surface of the focusing lens is contaminated, remove the focusing lens and clean its lower surface.

6\. Take special care when removing the focusing lens, be careful not to damage or drop it, and do not touch the focusing lens surface with your hand or other objects.

7\. The cleaning method is to mix anhydrous ethanol (analytical grade) with ether (analytical grade) in a ratio of 3:1, and infiltrate the mixture with a long-fiber cotton swab or lens paper, and gently scrub the lower surface of the focusing lens. On one side, the cotton swab or lens paper must be replaced once.

8\. In the working process of the marking machine, do not move the laser marking machine to avoid damaging the machine.

9\. Do not cover the stacker or put other items on the fiber laser marking machine, so as not to affect the heat dissipation effect of the machine.

**CAUTION**

1\. Laser marking machine light pen in operation, do not touch the beam.

2\. Fiber laser source is the core of a laser marking machine, we must move carefully to avoid improper mobile crusher.

3\. In operation, once found fault, to be stopped immediately in order to avoid casualties.

4\. Laser marking machine can not be started at the wrong time of the water cycle.

5\. When ready to turn off the marking, shall set about current 5A.

6\. Work among the working area should be higher than the operating format.

7\. Keeping the exterior surfaces clean and tidy.

8\. To maintain the internal fiber laser marking machine circulating water clean, clean the water tank regularly and exchange of clean deionized water.

**For different type fiber laser marking machine, welcome to click our product here:**

| [![Standard fiber laser marking machine](<> "Standard fiber laser marking machine")](https://www.stylecnc.com/fiber-laser-marking-machine/Desktop-fiber-laser-marking-machine-for-metal-and-non-metal.html "Standard fiber laser marking machine") | [![3D fiber laser marking machine](<> "3D fiber laser marking machine")](https://www.stylecnc.com/fiber-laser-marking-machine/3D-laser-marking-machine-with-IPG-fiber-source.html "3D fiber laser marking machine") | [![Flying fiber laser marking machine](<> "Flying fiber laser marking machine")](https://www.stylecnc.com/fiber-laser-marking-machine/online-flying-fiber-laser-marking-machine.html "Flying fiber laser marking machine") | [![Flying fiber laser marking machine](<> "Flying fiber laser marking machine")](https://www.stylecnc.com/fiber-laser-marking-machine/portable-fiber-laser-marking-machine.html "Portable fiber laser marking machine") |
| --- | --- | --- | --- |
| Standard fiber laser marking machine | 3D fiber laser marking machine | Flying fiber laser marking machine | Portable fiber laser marking machine |

### Share This Article With Others

### Further Reading

#### A Basic Guide to Dust Collection System for CNC Wood Router

2016-03-01 [Prev Post](https://www.stylecnc.com/user-manual/Dustproof-methods-for-CNC-wood-router.html "A Basic Guide to Dust Collection System for CNC Wood Router")

### 9 Maintenance Tips for Woodworking CNC Router in Summer

2016-03-26 [Next Post](https://www.stylecnc.com/user-manual/Woodworking-cnc-router-maintenance-method-in-summer.html "9 Maintenance Tips for Woodworking CNC Router in Summer")

### Related Guidance

[![Laser Marking Machine VS Inkjet Printer](<> "Laser Marking Machine VS Inkjet Printer")](https://www.stylecnc.com/blog/laser-marking-machine-vs-inkjet-printer.html "Laser Marking Machine VS Inkjet Printer")

2022-05-175 Min Read

#### [Laser Marking Machine VS Inkjet Printer](https://www.stylecnc.com/blog/laser-marking-machine-vs-inkjet-printer.html)

For products that require fine marking, laser marking systems have unique advantages, and inkjet printers will gradually be replaced by laser marking machines. Let us make a comparison between them.

[![What Makes Up A Fiber Laser Cutting Machine?](<> "What Makes Up A Fiber Laser Cutting Machine?")](https://www.stylecnc.com/user-manual/fiber-laser-cutting-machine-main-parts.html "What Makes Up A Fiber Laser Cutting Machine?")

2023-02-274 Min Read

#### [What Makes Up A Fiber Laser Cutting Machine?](https://www.stylecnc.com/user-manual/fiber-laser-cutting-machine-main-parts.html)

A fiber laser cutting machine consists of a generator, cutting head, CNC cutting system, motor drive, bed frame, water chiller, stabilizer, air supply system, dust collector, laser beam delivery components, and other parts & accessories.

[![Things To Consider When Buying A Fiber Laser Metal Cutter](<> "Things To Consider When Buying A Fiber Laser Metal Cutter")](https://www.stylecnc.com/cnc-solutions/fiber-laser-cutting-machine.html "Things To Consider When Buying A Fiber Laser Metal Cutter")

2023-12-088 Min Read

#### [Things To Consider When Buying A Fiber Laser Metal Cutter](https://www.stylecnc.com/cnc-solutions/fiber-laser-cutting-machine.html)

Need to buy a fiber laser cutting machine for sheet metal & tube fabrication? Here is a guide on how to find & buy a fiber laser metal cutter for your business.

[![How to Make Money with Profitable Fiber Laser Engraver?](<> "How to Make Money with Profitable Fiber Laser Engraver?")](https://www.stylecnc.com/blog/how-to-make-money-with-portable-fiber-laser-engraver.html "How to Make Money with Profitable Fiber Laser Engraver?")

2023-08-255 Min Read

#### [How to Make Money with Profitable Fiber Laser Engraver?](https://www.stylecnc.com/blog/how-to-make-money-with-portable-fiber-laser-engraver.html)

Looking for a profitable laser marking machine to start a personalization business? Review the guide on how to use a beneficial fiber laser engraver to make money.

[![A Comparison of MOPA and Q-Switched Laser Marking Machine](<> "A Comparison of MOPA and Q-Switched Laser Marking Machine")](https://www.stylecnc.com/cnc-solutions/The-difference-between-MOPA-and-Q-switch-laser-marking-machine.html "A Comparison of MOPA and Q-Switched Laser Marking Machine")

2022-05-245 Min Read

#### [A Comparison of MOPA and Q-Switched Laser Marking Machine](https://www.stylecnc.com/cnc-solutions/The-difference-between-MOPA-and-Q-switch-laser-marking-machine.html)

What are the similarities & differences between MOPA laser marking system and Q-switched laser marking machine? Review the comparison of the two fiber laser markers.

[![Four Elements Influencing Speed of Laser Marking Machine](<> "Four Elements Influencing Speed of Laser Marking Machine")](https://www.stylecnc.com/user-manual/4-factors-affecting-the-speed-of-laser-marking-machine.html "Four Elements Influencing Speed of Laser Marking Machine")

2021-08-312 Min Read

#### [Four Elements Influencing Speed of Laser Marking Machine](https://www.stylecnc.com/user-manual/4-factors-affecting-the-speed-of-laser-marking-machine.html)

STYLECNC will help you to understand what are the four elements influencing the marking speed of laser marking machine, and how to avoid or fix them.

### Post A Review

1 to 5-star rating5 stars4 stars3 stars2 stars1 star

#### Share Your Thoughts And Feelings With Others

Review Title

Your Name

Your Email

Your Review

Guest Post

Captcha

![Click To Change Captcha](<> "Click To Change Captcha")

Submit Your Review

### Hotspot Guides

![How Fast And Thick Can Fiber Lasers Cut Through Metal?](<> "How Fast And Thick Can Fiber Lasers Cut Through Metal?")

#### [How Fast And Thick Can Fiber Lasers Cut Through Metal?](https://www.stylecnc.com/blog/fiber-laser-cutting-metal-thickness-speed-power.html)

2025-02-05

![How to Generate G-Code File with ArtCAM for CNC Machine?](<> "How to Generate G-Code File with ArtCAM for CNC Machine?")

#### [How to Generate G-Code File with ArtCAM for CNC Machine?](https://www.stylecnc.com/user-manual/how-to-generate-g-code-file-artcam-cnc-machine.html)

2026-03-27

![How to Install and Use NcStudio for CNC Router Machine?](<> "How to Install and Use NcStudio for CNC Router Machine?")

#### [How to Install and Use NcStudio for CNC Router Machine?](https://www.stylecnc.com/user-manual/Weihong-Ncstudio-engraver-user-s-operation-manual.html)

2024-01-17

![3 Axis vs 4 Axis vs 5 Axis CNC Router Machine](<> "3 Axis vs 4 Axis vs 5 Axis CNC Router Machine")

#### [3 Axis vs 4 Axis vs 5 Axis CNC Router Machine](https://www.stylecnc.com/user-manual/3-4-5-axis-cnc-router.html)

2024-01-02

![A Guide to CNC Programming for Beginners \& Programmers](<> "A Guide to CNC Programming for Beginners & Programmers")

#### [A Guide to CNC Programming for Beginners & Programmers](https://www.stylecnc.com/blog/cnc-programming.html)

2023-08-31

![How To Laser Engrave Metal with A Diode Laser?](<> "How To Laser Engrave Metal with A Diode Laser?")

#### [How To Laser Engrave Metal with A Diode Laser?](https://www.stylecnc.com/user-manual/how-to-engrave-metal-with-diode-laser.html)

2026-03-27

### CNC Machine Catalog

- [CNC Routers](https://www.stylecnc.com/cnc-router/ "CNC Router")
- [CNC Plasma Cutters](https://www.stylecnc.com/plasma-cutter/ "CNC Plasma Cutter")
- [CNC Milling Machines](https://www.stylecnc.com/cnc-milling-machine/ "CNC Milling Machine")
- [CNC Machining Centers](https://www.stylecnc.com/cnc-working-center/ "CNC Machining Center")
- [Edge Banding Machines](https://www.stylecnc.com/edge-banding-machine/ "Edge Banding Machine")
- [CNC Bending Machines](https://www.stylecnc.com/cnc-bending-machine/ "CNC Bending Machine")
- [Laser Cutting Machines](https://www.stylecnc.com/products/laser-cutting-machine.html "Laser Cutting Machine")
- [Laser Marking Machines](https://www.stylecnc.com/laser-marking-machine/ "Laser Marking Machine")
- [Laser Welding Machines](https://www.stylecnc.com/laser-welding-machine/ "Laser Welding Machine")
- [Laser Cleaning Machines](https://www.stylecnc.com/laser-cleaning-machine/ "Laser Cleaning Machine")
- [Laser Engraving Machines](https://www.stylecnc.com/laser-engraving-machine/ "Laser Engraving Machine")
- [CNC Digital Knife Cutters](https://www.stylecnc.com/cnc-knife-cutting-machine/ "CNC Digital Knife Cutting Machine")
- [CNC Wood Lathe Machines](https://www.stylecnc.com/wood-lathe/ "CNC Wood Turning Lathe Machine")
- [CNC Parts, Tools, Accessories](https://www.stylecnc.com/spare-parts/ "CNC Spare Parts, Tools, Accessories")

### Get Easy Solution

Your Machine Your Machine CNC Mill CNC Lathe CNC Router Laser Cutter Laser Welder Laser Cleaner Laser Engraver Edge Bander Panel Bender Digital Cutter Plasma Cutter Waterjet Cutter CNC Machining Center Multiple Tools Not Listed Above

Your Material Your Material Metal Wood Foam Glass Paper Stone Fabric Plastic Acrylic Crystal Rubber Leather Composites Multiple Materials

Your Budget Your Budget No Budget Under $3,000 $3,000 - $6,000 $6,000 - $8,000 $8,000 - $10,000 $10,000 - $12,000 $12,000 - $15,000 $15,000 - $20,000 $20,000 - $30,000 $30,000 - $50,000 $50,000 - $80,000 $80,000 - $100,000 Over $100,000

Your Email

Your Requirements

Submission Successful, Redirecting In 5 Seconds...

[Scroll To Top](https://www.stylecnc.com/user-manual/Daily-maintenance-of-fiber-laser-marking-machine.html)

### STYLECNC